Datasheets

All structural and external timbers are pressure impregnated against rot and fungal attack. All structural timbers are stress graded and comply with the relevant British Standards and the NHBC Regulations. Our standard timberframe kit specification is as follows: [Walls][Floor][Roof][Plasterboard][Insulation][Internal Trim-Out][Miscellaneous]

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)
• 90 x 220 whitewood lintels to openings
• 9.5 mm OSB/exterior grade plywood
• breather membrane factory fitted to panels

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)
• 90 x 220 whitewood lintels with one row of noggins

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)

• 38 x 50 Carcassing

Plumbing/Electrical
Noggins

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)

• to suit structural calculations on each individual design

• 18mm t & g OSB flooring
• waterproof glue provided for fixing on site

• 150mm insulation

• to suit structural calculations on each individual design

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)
• 9.5 mm OSB/exterior grade plywood
• breather membrane factory fitted to panels

• 38 x 89 CLS (standard)
• 38 x 150 CLS (optional extra)

• Ruberoid underlay roofing felt

• 6" white uPVC

• 25 x 50 laths

• 12.5 mm plasterboard to walls and ceiling

• 200mm insulation to roofspace
• 100mm insulation to external walls (standard)
• 150 mm insulation to external walls (optional extra)

• 4" redwood skirting (moulded)
• 3" redwood architrave (moulded)
• 2" doorstop
• 6 panel white colonist doors

• stainless steel wall ties
• holding down straps
• nails and screws for erection on site